8.9k. Name: arthur. Ford Model: focus mk2 ti-vct. Ford Year: 2006. UK/Ireland Location: Fife. Posted March 26, 2010. Silly question i know,, but could anyone tell me please the location of the egr valve on my 2001 1.8 ltr ford mondeo . I have never had the pleasure of replacing / cleaning one before as this is my first mondeo , any help with
Hi there thanks sorry for the delay I don't know which post you have read as I have dealt with many many customer red over the years in regards ***** ***** code and the 1.8tdvi and 1.6 tdci diagnostics vary due to the different setups Ok the p0299 code is a turbo underboost code this is set when the expected and actual boost pressures don't match up The most common concern on the 1.8tdciUK/Ireland Location: ---------SCOTLAND-----------. Posted March 8, 2013. Hello and welcome to the forum. You can fit an EGR blanking plate, it only costs about £5 so is much cheaper than an EGR valve and once fitted, you are unlikely to have any problems - apart from the EML coming on on euro 4 cars. , the not starting, clouds of smoke and
I drive a 2003 Focus 1.8 TDCI with 115k miles on the clock and all I did was disconnect the vacuum hose from the valve and bunged an old bolt in the rubber hose. The car ran perfectly before this and still does, I only did it as a precautionary measure after reading so many horror stories. Finally here is a screenshot of how the parameters look like now in Forscan. so you can see egr valve at 88.5 % at idle and all learnt values for the egr. The egr is also opening and closing 3-4 times after engine off from 0% till 99,5% for the cleaning and self test procedure ( thing that was not happening till now ).